address:No.10, Lane 669, Min Ta Road, Songjiang District, Shanghai, China
phone:189-1713-2726
email:qianghaibin@sh-yhcd.com
1. Reduce the conducted interference from converter to electrical network
2. Improve the reliability of the entire system.
3. Use connectors for rated current below 100A, and copper busbars for rated current above 200A
4. Low leakage current. The maximum leakage current for phase loss is 13.12mA (except P type)
1. Rated Voltage: 690/380 VAC
2. Rated Frequency: 50Hz
3. Rated Current: 120 ~ 1000A
4. High Voltage Test : P-E 2850VDC/60 P-P 2850VDC/60s
5. Temperature Range: -25 ~ +100℃
6. Design Standard: IEC/EN 60939
7. Typical Work Frequency: 150kHz ~ 30MHz
安規(guī)認證用輸入濾波器最后加P,如輸入25A型號為RFI6C25N10P) | |||||
適配變頻器參數(shù) | 型號 | 額定電流 | 端子代碼 | ||
功率 | 額定電壓 | 輸入濾波器 | 輸出濾波器 | (A) |
|
18.5 | 660-690 | RFI6C25N10 | RFI6C25N10 | 25 |
|
37 | 660-690 | RFI6C50N35 | RFI6C50N35 | 50 | -N10 |
55 | 660-690 | RFI6C80N35 | RFI6C80N35 | 80 | -N35 |
75 | 660-690 | RFI6C100N35 | RFI6C100N35 | 100 | -N35 |
132 | 660-690 | RFI6C200N99 | RFI6C200N99 | 200 | -N35 |
150 | 660-690 | RFI6C200N99 | RFI6C200N99 |
|
|
185 | 660-690 | RFI6C250N99 | RFI6C250N99 | 250 |
|
200 | 660-690 | RFI6C250N99 | RFI6C250N99 |
|
|
250 | 660-690 | RFI6C350N99 | RFI6C350N99 | 350 |
|
315 | 660-690 | RFI6C400N99 | RFI6C400N99 | 400 |
|
400 | 660-690 | RFI6C550N99 | RFI6C550N99 | 550 |
|
500 | 660-690 | RFI6C650N99 | RFI6C650N99 | 650 |
|
630 | 660-690 | RFI6C800N99 | RFI6C800N99 | 800 |
|
715 | 660-690 | RFI6C900N99 | RFI6C900N99 | 900 |
|
800 | 660-690 | RFI6C1000N99 | RFI6C1000N99 | 1000 |
This series of filters is mainly used in 690V converters among which the P series is used to safety certification. P seris cannot be used in mines, otherwise it may cause the leakage protector to trip.
代號 Code 電流 | A | B | C | D | E | F | G | H | M | N | U | V | W | X | Y | Z |
25 | 180 | 120 | 35 | 100 | 155 | 168 | 6*9 | M8 |
|
|
|
|
|
|
|
|
50-100 | 280 | 240 | 39 | 120 | 185 | 200 | 6*9 | M8 |
|
|
|
|
|
|
|
|
200-250 | 320 | 260 | 40 | 130 | 195 | 220 | 8*15 | M8 |
|
| 104 | 4 | 25 | 12.5 | 60 | 10.5 |
350-550 | 420 | 340 | 45 | 170 | 248 | 270 | 11*18 | M10 |
|
| 140 | 8 | 40 | 12.5 | 75 | 10.5 |
650-1000 | 600 | 480 | 80 | 240 | 300 | 350 | 11*18 | M10 | 26 | 26 | 180 | 8 | 50 | 17 | 100 | 12.5 |
-N6 | -N10 | -N16 | -N35 | -N50 | -N95 | |
多股軟線/mm2 | 0.5-6 | 0.5-10 | 1-16 | 10-35 | 16-50 | 25-95 |
美標線規(guī) | AWG8-26 | AWG6-24 | AWG4-20 | AWG2-8 | AWG6-1/0 | AWG4-4/0 |
推薦扭矩/N.m | 1.36 | 1.36 | 2.71 | 4.41 | 4.41 | 192 |