address:No.10, Lane 669, Min Ta Road, Songjiang District, Shanghai, China
phone:189-1713-2726
email:qianghaibin@sh-yhcd.com
1. Reduce conducted interference to solar panels, helping the entire PV system comply with international EMC regulations
2. Excellent capability to suppress CM and DM noise
3. Reduce the probability of EMI failure in solar and wind energy inverter power generation systems
4. Reduce high-frequency current to help prevent premature aging of solar panels
5. Use solid safety connectors for rated current below 100A, and use copper busbars for rated current above 150A
1. Maximum Continuous Operating Voltage: 1200VDC
2. Rated Frequency: DC
3. Rated current: 25 ~ 2300A @55℃
4. High Voltage Test : P-E 3600VDC/5sec P-P3000VDC/5sec
5. Temperature Range: -25 ~ +100℃
6. Design Standard: IEC/EN 60939
7. Typical Work Frequency: 150kHz ~ 30MHz
8. Protection Class: IP20(25 ~ 100A) IP00(150 ~ 2300A)
型號 | 額定電流 | 功率 | 能量損耗 | 端子類型 |
RFD12B25DN10 | 25 | 10 | 8 | 端子sold safety connector |
RFD12B50DN35 | 50 | 20 | 17 | 端子sold safety connector |
RFD12B80DN35 | 80 | 30 | 18 | 端子sold safety connector |
RFD12B100DN35 | 100 | 40 | 22 | 端子sold safety connector |
RFD12B150DN99 | 150 | 60 | 31 | 銅排 copper busbar |
RFD12B200DN99 | 200 | 80 | 36 | 銅排 copper busbar |
RFD12B300DN99 | 300 | 120 | 14 | 銅排 copper busbar |
RFD12B400DN99 | 400 | 150 | 16 | 銅排copper busbar |
RFD12B600DN99 | 600 | 250 | 29 | 銅排 copperv busbar |
RFD12B800DN99 | 800 | 350 | 26 | 銅排 copper busbar |
RFD12B1000DN99 | 1000 | 400 | 40 | 銅排 copper busbar |
RFD12B1500DN99 | 1500 | 500 | 45 | 銅排 copper busbar |
RFD12B2300DN99 | 2300 | 800/1000 | 84 | 銅排 copper busbar |
Based on rated DC current of typical 3-phase PV inverters with 900VDC input.Filters with higher rated currents for large central inverters up to the MW range can be customized. |
This series of filter is mainly used in photovoltaic and wind power inverters. It can also be used in other DC applications, such as UPS, DC motor drives, railways, and DC fast chargers.
代號Code 電流 | A | B | C | D | E | F | G | H | M | N | U | V | W | X | Y | Z |
25 | 160 | 178 | 35 | 65 | 60 15 | 85 | 5.5 | M5 |
|
|
|
|
|
|
|
|
50-80 | 170 | 188 | 38.5 | 80 | 75 15 | 95 | 5.5 | M6 |
|
|
|
|
|
|
|
|
100 | 190 | 208 | 38.5 | 95 | 100 20 | 125 | 5.5 | M8 |
|
|
|
|
|
|
|
|
150-200 | 220 | 238 | 40 | 115 | 110 20 | 140 | 5.5 | M8 |
|
|
|
|
|
|
|
|
300 | 300 | 240 | 58 | 110 | 165 42.5 | 190 | 12.5 | M10 |
|
| 70 | 4 | 25 | 15 | 58 | 11 |
400 | 300 | 240 | 58 | 110 | 165 42.5 | 190 | 12.5 | M10 |
|
| 70 | 6 | 25 | 15 | 58 | 11 |
600 | 300 | 240 | 58 | 110 | 165 42.5 | 190 | 12.5 | M10 |
|
| 70 | 8 | 25 | 15 | 58 | 11 |
800-1000 | 300 | 240 | 65 | 140 | 175 47.5 | 200 | 12.5 | M10 |
|
| 70 | 8 | 40 | 20 | 60 | 14 |
1500 | 300 | 240 | 110 | 150 | 175 47.5 | 200 | 12.5 | M12 | 26 | 43 | 70 | 10 | 60 | 17 | 60 | 14 |
2300 | 400 | 340 | 100 | 180 | 225 49.5 | 250 | 12.5 | M12 | 35 | 35 | 110 | 15 | 70 | 20 | 75 | 14 |
-N6 | -N10 | -N16 | -N35 | -N50 | 25 | |
多股軟線/mm2 | 0.5-6 | 0.5-10 | 1-16 | 10-35 | 16-50 | 25-95 |
美標線規(guī) | AWG8-26 | AWG6-24 | AWG4-20 | AWG2-8 | AWG6-1/0 | AWG44/0 |
推薦扭矩/N.m | 1.36 | 1.36 | 2.71 | 4.41 | 4.41 | 19.2 |